CARBON is primarily designed as a pattern-based sequencer. It has six tracks which can each hold 64 steps. Steps can be generated randomly, edited interactively, or recorded from a MIDI keyboard one step at a time, or in realtime while the sequencer is running. Polyphony and CC recording is supported so each step can contain chords or other performance data.
The fun begins once you've got some notes playing back on a track. Choose a region to play back, say, the first 8 steps. The track will play those same 8 steps over and over. Now move to another track and record a new sequence. This sequence can be a different length, or play back at a different speed. It can even play backwards while the other sequence plays forwards.
The real power of CARBON is how variations of sequences can be made. By simply turning the PATTERN control, different steps in the sequence can be enabled and disabled. The patterns will surprise and inspire you by creating new rhythms and motifs with a simple twist of a knob. These are all based on your original sequence and can be changed at any time.
Adding in the concept of scenes lets you quickly switch between different parts of a song or different variations. Scenes can store the range of steps to play, the pattern, track mute state and a number of other parameters. Switching back and forth between scenes offers endless performance potential without ever missing a beat.
The best part of the CARBON sequencer is that all the recording and editing can be done in real-time without ever stopping the sequencer.
Do you fire up your DAW software in the studio to simply route MIDI signals from your keyboard controller to various instruments? Creating a session just to route MIDI is clunky and slow, and on stage requiring a computer can be a liability. The LIVE button allows live playing to any combination of outputs.
CARBON is a complete performance switching system allowing you to easily send your keyboard signal to MIDI and analog instruments. Two built-in MIDI outputs enable separate routing of clock and channel signals from each track. The analog section supports four CV/gate outputs plus reset and clock signals. Both monophonic and duo/polyphonic output types are supported. You can even send to multiple MIDI and analog instruments at the same time!
Does your favourite keyboard controller lack a keyboard split function? It's never been easier to send MIDI where you want it. Send your left hand to one instrument and your right to another, or two others if you want. Quickly switch back to a single instrument across the entire keyboard at the touch of a button.
A good arpeggiator has been the holy grail electronic performers for decades. CARBON has a powerful internal arpeggiator which supports all the standard arp types plus loads more. Each of the six tracks in CARBON has a separate arp so you can make serious harmonic madness!
When the sequence is running the arp automatically syncs to the sequencer. When it's stopped the arp starts as soon as you press a key. Intelligent reload arp programming allows you time to change chords without losing a step.
Want to use a USB controller that lacks MIDI output ports? No problem! CARBON has a built-in USB host interface that will power your class-compliant MIDI device and allow you to use it to control CARBON or send MIDI or CV/gate signals to any device. You no longer need a computer or other dedicated box to use your favourite USB MIDI controller.
Need to use your computer for bigger compositions? Don't worry, you don't have to disconnect CARBON. When plugged into a PC or Mac, CARBON becomes a powerful MIDI and CV interface. Use the control surface to run your DAW software. The display can also be controlled via MIDI. (open spec - future software / plugins required)
All your instruments connected to the MIDI and analog CV ports can be used directly from your DAW software. The analog clock and reset outputs can also be used to drive analog clock-based gear from your DAW.